Beijer-electronics SCOM Protocol EN User Manual download pdf (Page 89)

Command Reference

Beijer Electronics, MAEN975 89

Example

Read the lower backlight level range limit configuration for the monitor at address

0.7 (group 0, address 7):

According to the data returned by the monitor at address 0.7 (group 0, address 7),

the lower backlight level range limit is 0 (0x00). This means, the user cannot adjust

the backlight level lower than the ECDIS backlight level, using the front panel key:

0 1 2 3 4 5 6 7...8 9

0x07 0x07

0x4C 0x41 0x55 0x02 0x0D 0x01 0x22 0xDC

0 1 2 3 4 5 6 7 8

0x06 0x07

0x4C 0x41 0x55 0x01 0x0F 0x00 0xFF

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 130 131

SCOM Protocol 1
Foreword 2
Contents 3
1 Interface Configuration 7
2 Ethernet Communication 8
Dynamic Addressing 9
Static Addressing 9
Sample Application 10
SCOM Message Basic Format 11
4 Monitor Addressing 13
Ti: Inter-message gap [s] 14
Delayed Response 15
Related information 16
6 Command Reference 17
6.1 BRT 18
6.2 MAN 20
6.3 VER 21
6.4 POT 22
6.5 MCC 24
6.6 MCC_BRIGHTNESS (0x81) 26
6.7 MCC_CONTRAST (0x82) 29
6.8 MCC_SCALINGMODE (0x8C) 32
6.9 MCC_GAMMAVALUE (0x9D) 34
6.10 MCC_COLOURTEMP (0xB3) 36
6.11 MCC_REDLEVEL (0xB4) 38
6.12 MCC_GREENLEVEL (0xB5) 41
6.13 MCC_BLUELEVEL (0xB6) 44
6.14 TYP 47
6.15 ETC 48
6.16 LAU 50
Firmware Version 52
Host Name 53
MAC (Ethernet) Address 55
Static IP Address 56
Subnet Mask 57
Gateway Address 58
DHCP Mode 59
(0x0109) 60
(0x010A) 61
(0x010B) 62
(0x010C) 63
(0x010D) 64
DIL Switch Mode 65
(0x010F) 66
(0x0110) 67
Baudrate 70
POT Mode 71
ECDIS Mode 72
(0x0115) 73
(0x0116) 74
(0x0117) 75
(0x0118) 76
(0x0119) 77
(0x011A) 78
(0x011B) 79
(0x011C) 80
(0x011D) 81
(0x011E) 82
(0x011F) 84
(0x0120) 85
(0x0122) 88
(0x0123) 90
0 1 2 3 4 5 6 7...8 9 91
0 1 2 3 4 5 6 7 8 91
(0x0125) 92
(0x0127) 93
ECDIS Mode Control 94
Buzzer Control 96
Digital Output Control 98
6.57 LAU_CONTROL_ANALOGTOBRT 100
(0x0204) 100
0 1 2 3 4 5 6 7...9 10 101
0x07 0x07 101
(0x0205) 102
Command Reference 103
Example 103
Digital Input Configuration 104
Current IP Address 106
Current Monitor Address 107
Current POT Mode 110
Current ECDIS Mode 111
Current Buzzer State 112
Current Backlight State 113
Current Analog Input Value 117
(0x030C) 119
(0x030E) 122
7 Sample Communication 125
Application 125

Comments to this Manuals

No comments

Beijer-electronics SCOM Protocol EN User Manual Page 89

Comments to this Manuals

Related products and manuals for Monitors Beijer-electronics SCOM Protocol EN