Beijer-electronics iX T12B EN User Manual

iXT12BInstallationManualEnglishMAEN096C,2013-09

Installation2.2.2 OtherConnectionsandPeripheralsCables, peripheral equipment and accessories must be suitable for the applicationand its environment.

Technical Data3TechnicalDataParameter iXT12BFrontpanel,W×H×D 340×242×79mmCutoutdimensions,W×H324×226mmMountingdepth 72mm(172mmincludingclearance)Stand

Technical DataParameter iXT12BOperatingtemperature-10°C–+50°CStoragetemperature -20°C–+70°CRelativehumidity 5%–85%non-condensedApprovalsandcertificatio

Chemical Resistance4 ChemicalResistance4.1 MetalCasingThe frame and casing material is powder-coated aluminum. This powder paintwithstands exposure to

Chemical Resistance4.2 TouchScreenandOverlay4.2.1 AutoflexEBA180LAutoflex EBA 180L covers the overlay surrounding the touch screen.SolventResistanceAuto

Chemical Resistance4.2.2 TouchScreenSurfaceThe touch screen surface on the operator panel withstands exposure to thefollowing solvents without visible

Operator Panel Drawings5 Opera torPanelDrawings5.1 Connectors1234567Pos. Connector Description1 Powersupply +24VDC(18-32VDC)2 COM1/2 CommunicationPort

Operator Panel Drawings5.3 iXT12BOutlinemax. 8 mm5072249924234032299Note:AStepCADfileisavailableonthewebsitewww.beijerelectronics.comBeijerElectronics,

Additional Installation Tips6 AdditionalInstallationTipsWhen experiencing communication problems in for example noisy environmentsor when operating cl

Additional Installation TipsNote:Thegroundingwiresshouldbeshortandtheconductorshouldhavealargearea.Along,thingroundingwirehasaveryhighimpedance(resist

ForewordInstallationmanualforiXT12BForewordAll operator panels are developed to satisfy the demands of human-machinecommunication. Built-in functions

Additional Installation TipsA good solution may be to use a shielded Ethernet cable, but to co nnect the shieldat one end only.One option is to break

Additional Installation Tips6.3 ToAchieveBetterEMCProtection• Initially, use the original cabling from Beijer Electronics primarily.• Use shielded cab

Additional Installation Tips6.4 AmbientTemperatureThe maximum ambient temperature for the operator panel is provided in thespecifications. The ambient

Additional Installation Tips6.5 SafetyMost of the operator panels are fed with 24 V DC.412434Power supply230 V AC to 24 V DCPower supply230 V AC to 24

Additional Installation Tips6.6 GalvanicIsolationUSBUSBRS232RS422/485+24 V DC0 VFilterDC/DCgalvanic isolationVCC0 V (GND)DC/ACCFLEthernetInternal elec

Additional Installation Tips6.7 CableandBusTerminationRS485• If maximum transfer distan ce and maximum transfer speed is needed,shielded and twisted p

HeadofficeBeijerElectronicsABBox4 2620124Malmö,Swedenwww.beijerelectronics.com/+4640358600

ContentsContents1 SafetyPrecautions ... 41.1 General ...

Safety Precautions1SafetyPrecautionsBoth the in staller and the owner and/or operator of the operator panel must readand understand this installation

Safety Precautions• For Canada also AVERTISSEME NT – AVANT DE DECONNECTERL’EQUIPEMENT, COUPER LE COURANT OUS’ASSURER QUEL‘EMPLACEMENT EST DESIGNE NON

Safety Precautions• Separate the high voltage, signal and supply cables.• Make sure that the voltage and polarity of the power source i s correct befo

Installation2Installation2.1 SpaceRequirements• Maximum installation plate thickness: 8 mm• Space requirements in millimeters when installing the oper

Installation2.2 InstallationProcessThe following is needed:• ATorxTX7screwdriver1.Unpack and check the delivery. If damage is found, notify the suppli

Installation4.Connect the cables in the specified order, according to the drawing and stepsbelow.Caution:• Ensurethattheoperatorpanelandthecontrollersy