Beijer-electronics SCOM Protocol EN User Manual download pdf (Page 27)

Command Reference

Elektronik-Systeme Lauer, MAEN976 27

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a device never sends a negative acknowledge in

response to this command.

MCC Sub-commands

All supported MCC sub-commands are described in the following sections.

0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]

0x06 ADR 0x4D 0x43 0x43 LEN ICHKH SCMD Param Ret ICHKD

SCMD / Param

Video controller specific sub-command and parameter(s), sent with the

command stream

Ret

Data returned by the monitor, i.e. current value of the selected video

controller setting

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 142 143

SCOM Protocol 1
Foreword 2
Contents 3
1 Interface Configuration 9
2 Ethernet Communication 10
Dynamic Addressing 11
Static Addressing 11
Sample Application 12
SCOM Message Basic Format 13
4 Monitor Addressing 15
Ti: Inter-message gap [s] 16
Delayed Response 17
Related information 18
6 Command Reference 19
6.1 BRT 20
6.2 MAN 22
6.3 VER 23
6.4 POT 24
6.5 MCC 26
6.6 MCC_BRIGHTNESS (0x81) 28
6.7 MCC_CONTRAST (0x82) 31
6.8 MCC_SCALINGMODE (0x8C) 34
Main Video Signal Source 37
6.10 MCC_GAMMAVALUE (0x9D) 40
Selection 42
6.13 MCC_COLOURTEMP (0xB3) 47
Maximum Lr for this Command 48
6.14 MCC_REDLEVEL (0xB4) 50
6.15 MCC_GREENLEVEL (0xB5) 53
6.16 MCC_BLUELEVEL (0xB6) 56
6.17 TYP 59
6.18 ETC 60
6.19 LAU 62
Firmware Version 64
Host Name 65
MAC (Ethernet) Address 67
Static IP Address 68
Subnet Mask 69
Gateway Address 70
DHCP Mode 71
(0x0109) 72
(0x010A) 73
(0x010B) 74
(0x010C) 75
(0x010D) 76
DIL Switch Mode 77
(0x010F) 78
(0x0110) 79
Baudrate 82
POT Mode 83
ECDIS Mode 84
(0x0115) 85
(0x0116) 86
(0x0117) 87
(0x0118) 89
(0x0119) 90
(0x011A) 91
(0x011B) 92
(0x011C) 93
(0x011D) 94
(0x011E) 95
(0x011F) 97
(0x0120) 98
(0x0122) 101
(0x0123) 103
0 1 2 3 4 5 6 7...8 9 104
0x07 0x07 104
0 1 2 3 4 5 6 7 8 104
(0x0125) 105
(0x0127) 106
ECDIS Mode Control 107
Command Reference 108
Example 108
Buzzer Control 109
Digital Output Control 111
6.60 LAU_CONTROL_ANALOGTOBRT 113
(0x0204) 113
0 1 2 3 4 5 6 7...9 10 114
(0x0205) 115
Digital Input Configuration 117
Current IP Address 119
Current Monitor Address 120
Current POT Mode 123
Current ECDIS Mode 124
Current Buzzer State 125
Current Backlight State 126
Current Analog Input Value 130
(0x030C) 132
(0x030E) 135
7 Sample Communication 137
Application 137
CiS-Nr.: 360.610.0280 143

Comments to this Manuals

No comments

Beijer-electronics SCOM Protocol EN User Manual Page 27

Comments to this Manuals

Related products and manuals for Monitors Beijer-electronics SCOM Protocol EN